With HomePhone+, there's no need for a phone socket. So you can simply plug it in to any electrical socket, anywhere you like, then press a button to register at your convenience.
 |
No appointment and no installation needed |
|
Support up to 4 extension units |
Complete the following steps to register and activate the service for the first time. HomePhone+ is ready for use in no time.
| 1. |
Make sure the power plug is connected to the DC jack on the bottom of the main docking station. |
| 2. |
Place the docking station where you'd like to keep it and make sure the plug is inserted into a standard power socket. |
| 3. |
Press the Red button to connect to our customer service agent, who will help you with your service registration process. |
| 4. |
When charging your battery for the first time, place the handset in the docking station for about a day, when not in use. |
| 1. |
If your HomePhone+ phone number is a new number, you can use the phone as soon as the service registration is complete. |
| 2. |
If you port-in your existing phone number (I.e. use your old phone number) to HomePhone+, you can use the phone from the port-in date. The date is stated on your Customer Notice Card. |
If you have an extension unit, you'll need to pair it with your main station. Make sure both docking stations are plugged into a standard power socket and the phones are charged.
| 1. |
Press the Paging button on the main docking station until the power LED light starts blinking. |
| 2. |
Press * on the extension phone until you see the message 'Start pairing' on the screen. |
| 3. |
Place the extension phone onto the main docking station. Wait until you see the message 'Pair completed' and you hear a 'beep' sound. |
| 4. |
Your extension phone is now connected. Place it back onto the extension docking station. |
